MAHLKONIG PARTS

This is the upgrade Flapper set for users who occasionally experience grounds coming out of their E80S inconsistently. While the E80S was designed to be easily maintained daily by removing and cleaning the silicone flapper, upgrading to this set allows...

These are the OEM burr set for Mahlkonig E65S Series Grinders and K30 Grinders. Made in Hamburg Germany. 

The new generation of Mahlkonig Espresso Grinders is designed to be easily maintained, with the silicone flapper being accessed and cleaned by simply removing the hopper and unlocking the top collar. These two screws are intended to only be loosened and...

EK43 hopper seal ring.  Can be used to replace the seal ring in both the EK43 and the EK43S.  This slightly thinner hopper gasket made from a different, softer material than the K30 series can also be used on all K30 series grinders. This works...

EK43 Mahlkonig shear plate is designed to keep the motor from being damaged if the burrs seize up; it will break before the motor does.  Can be used in both the EK43 and EK43S models. 

Mahlkonig E65S / E80S mini bean hopper with a capacity of about 300 grams of coffee beans and the ability to use the high performing grinder in tighter spaces or underneath a cabinet. With this hopper installed on the E65S grinder, the total height...

These are the OEM Mahlkonig Burrs specifically made for the Guatemala Lab and Shop Grinder. These burrs have newly designed geometry (2021 release) and will work on all generations of the Guatemala Grinder.  71mm Steel burrs Work with all Guatemala...

Pulling tool to take out the disc carrier for burrs exchange or other maintenance on: EK43 EK43 S EKK43 VTA 6S DK15 coffee grinders. 

This complete bag holder/ knocker assembly is made for the Mahlkonig EK43 and EK43S Grinders. 

Complete short bean hopper in black with white logo and 250 gram capacity for EK43, EK43 S, and EKK43 grinders. A fantastic option to lower the profile for an EK43 on a cafe bar. Color: black  250g capacity  Compatible with EK43, EK43S, EKK43...

These are the OEM 98mm Mahlkonig Burrs for EK43 and EK43S. These are the standard coffee burrs that will accommodate fine to very coarse. Premium cast steel burrs 98mm Not recommended for single-dose espresso, please see MK703803 Turkish Burrs. Replaces...

Mahlkonig E80S grinder series Interlock mechanic hopper engage-pin. 

4 piece set of rubber feet capatible for E65S, E65S Gbw, E80S, and E80S Gbw coffee grinders. 

Mahlkonig E80S Spout Adjustment Guide can be used for the E80 Supreme Grind by Weight and the E80 Supreme espresso grinders.    

Mahlkonig EK43 Grounds Tray keeps your space clean as you grind throughout the day. The tray has a durable and smooth surface so it is easy to dust off or wash.  Fits perfectly for the EK43 and the EK43S grinders. 

Mahlkonig EK43 On/Off Microswitch replacement for EK43, EK43S, and Guatemala grinders. 

Mahlkonig replacement power board for the E65S Grind by Weight grinder. 

Replacement portafilter holder for the Mahlkonig E65S and E65S Grind by Weight grinders. The mounting replacement tools can be found here

Replacement portafilter mount for the Mahlkonig E65S and E65S grind by weight grinders. The portafilter holder replacement set can be found here 

Replacement Mahlkonig E65S Grind by Weight load cell which enables groundbreaking real-time scale-controlled dosing, as it monitors the weight during the entire grinding process. 

Replacement Silicone and Metal Flapper set for E65S and E65S GbW espresso grinders. 

Replacement circuit breaker 110-127 Volt for the following grinders:  E80S E65S K30 Peak Practica

E80S start button microswitch replacement

Universal portafilter holder for E80S, E80S GbW Also Compatible with:  E65S Anfim practica

Standard Mahlkonig silicone flapper suitable for the E80S series. 

These are 98mm OEM Mahlkonig Burrs for the EK43 and EK43S, specifically used for Turkish Coffee and dedicated Espresso grinding. Anyone looking to accomplish single-dose espresso on an EK43 should install these burrs. While these burrs grind finer than...

These are OEM Mahlkonig Special Steel Burrs, the standard burr set for E80S Grinders, also compatible with Peak grinders. Compatible part numbers include 701617, 701618, 701619.